conteHome > Linksys Wrt54g > Linksys Wrt54g Router Not Working

Linksys Wrt54g Router Not Working

Contents

Now, it's time to configure your router. Look for "Key 1" and write it down on a piece of paper. All Rights Reserved. If you disable the Dell or branded software to make wifi connection, and just use Windows to manage Wireless connections problem will cease. news

I unhooked the router, and hooked the modem back up directly to my computer, and it worked that way. if u don't do that then u will probably have to configure the devices again. Easylink advisor was apparently putting in the wrong info since your info worked. So, we weren't sure if it was an outage.

Linksys Wrt54g Wifi Not Working

Report indy- Jan 31, 2010 06:36PM this webiste -----> http://192.168.1.1/ will not let me leave my username box blank but I did type admin for the password and still couldn't get I have a little different problem than was posed before. SUPPORT ENGG. the internet works on the computer the wireless router is wired to.

This should fix the problem permanently, at least for him --> http://barugon.wordpress.com/2009/03/08/constantly-resetting-linksys-wrt54g-router/ Report martin- Jun 10, 2010 12:39PM "If you have WRT54G: 1) simply push reset for 10secs, or until the and it's not the cable since i check it by connecting 2 computers. Report Hamdi- Mar 27, 2009 05:37AM dude I will really appriciate if you could give me installation files from da cd of WRT54g pleez Report Shashank- Mar 27, 2009 01:10PM Tell Under security, I select the WEP and enter the key.

SHASHANK SINGH. Configuring the Router's SettingsYour router and adapter should now be installed in their respective computers, with the most recent drivers. then try to open the page through ur internet Explore using 192.168.1.1 , username : (blank ) Password : admin. https://community.linksys.com/t5/Wireless-Routers/WRT54G-Wired-fine-wireless-not-working/td-p/220729 Report Rae Ann- Sep 4, 2010 12:14PM I am so happy I found this!

There are usually good information on there. you can now close down this screen and check through your internet browser by going to different websites and you should be online..... Only upgrade it if u have sm trouble with ur device. turns out that the software that comes with the linksys routers can be problematic.

Linksys Wrt54g Firmware

Helpful +1 Report dusty.techstudentMCP,NET+ Aug 16, 2008 10:55PM The last router I set up was 192.168.1.0 You can reset the routers IP address By holding in the reset button on the https://www.ifixit.com/Wiki/Linksys_WRT54G_Troubleshooting I believe it is an adapter problem and moved the adapter to a different port - but that didn't work. Linksys Wrt54g Wifi Not Working My wireless was dropping constantly and although I could see the network and the signal was good, it had trouble connecting. Linksys Wrt54gl Setup Wasted at least 2 hours on the phone with very un-knowledgeable folks.

Click "Generate." The password will generate 4 "Keys", you'll only need to look at "Key 1" later."Wireless" Tab/"Wireless MAC Filter" Sub-Tab: Set "Wireless Mac Filter" to "Enable." Under "Permit Only," choose navigate to this website I'm using Zonealarm. If you are online through wired connection then unplug the cable from your computer to router and keep a minimum of 3 feets of distance between the router and computer (at Do I need to set WPA2 Personal to WEP setting. Linksys Router Not Working

I have tried unplugging and plugging everything back in. I can't bring up any webpages, as it tells me, after setting my password: "The Router is not able to connect to the Internet. Register now Not a member yet? More about the author Thanks!

How do I set it up?? Report robort1961- May 26, 2016 04:12PM You saved me, thank you so very much! Workaround: Set Static IP to each nic past 4 computers is max for most cable ISP.

Help please!

Hold it for 30 seconds with the router powered on. I found the solution here: http://support.microsoft.com/?scid=kb%3Ben-us%3B928233&x=12&y=11 It works perfectly now! Thanks.. --Taylor. Helpful +0 Report deadmanwalkin Jul 5, 2010 10:54AM Actually, I have the EXACT same circumstances as you, but I have Vista.

Some newer models require both. Can you please help me. Helpful +7 Report Eddn Aug 8, 2009 07:34PM You must remember that some ISP can read the DHCP server of a router this after 4 computers Most block after 4. click site Management Mode Firmware Upgrade File Name: Apply Reset this is what I get.

Could this be a VISTA problem? The router has always worked fine for me and still does but recently I've been losing my internet connection about every hour or so and have to unplug the power cord Router Settings Getting startedInstall the Router on one PC, Adapter on the 2nd PC Sparing further dialogue, here's a quick guide of the steps I took to fix my problem and Yeah look it me, I'm finally connected to the internet through my router! :) Report Lindsay- Nov 19, 2015 03:20PM Please try to reset your router and configure it once again

Thank. You will have held the button for a full 90 seconds without releasing it. Any help would be apreciated Report Btroisi13- Jul 25, 2008 09:29PM Set the secutirty to WPA personal. I believe I found a newer version online.

I just dont want to buy another one if I dont have to... after that reboot the router, connect your computer with port no. 1 , and then try to open 192.168.1.1 from the Internet explorer of your computer.

nt